Jums ir tukšs Jūsu iepirkumu grozā.
Details
Fiio Q5s Nešiojamas stiprintuvas su DAC baterijos veikimo laikas iki 25 val (su AUX), įkrovimo laikas 3,5 val, (DV5V 2A), Micro USB jungtis | Nemokamas Pristatymas
Elegantiškas bei galintas Q5s - nešiojamas stiprintuvas su DAC
Specifikacijos
| Model | Q5s | Color | Titanium |
| Weight | About 195g | Dimensions | About 124mm x 64mm x 16mm |
| Audio Input | Standard 3.5mm Port (Shared Line / Coaxial/ Optical in) | Digital Coaxial Input Port | Standard 3.5mm Port (Shared Line / Coaxial/ Optical in) |
| Digital/Optical Input Port | Standard 3.5mm Port (Shared Line / Coaxial/ Optical in) | USB Port | Micro USB（11pin） Data exchanging 、 Charging、Firmware upgrade |
| Analog Input port(LO) | Standard 3.5mm stereo jack | Headphone Output Port | Standard 3.5mm stereo jack |
| Balanced Output Port | 2.5mm/4.4mm port | Recommended Headphone Impedance | 16~150Ω(PO) |
| 16~300Ω(BAL) | |||
| Channel Balance | 0.1 dB | Gain | Yes(High/Low) |
| Bass Boost | Yes | Volume Control | Potentiometer(ADC Sampling) |
| APP interconnection | Supports setting through App | Bluetooth codec indication | Yes |
| Supports connection to Sony Walkman players | Yes | Sampling rate indication | Yes |
| Deep-sleep | utomatic stand-by, can be controlled on App | Firmware upgrade | System firmware and Bluetooth version can be upgraded through USB |
| Power Supply | DC5V 2A (Recommended) | Battery Capacity | 3800 mAh |
| Charge Time | ≤3.5 h （DV5V 2A） | Battery Life | ＞25 h (AUX IN) |
| ＞9.5 h (USB IN) | |||
| ＞9.5 h (OPT IN) | |||
| ＞9.5 h (COAX IN) | |||
| ＞9.5 h (Bluetooth IN) | |||
| Charging Indicator | The side blue light flashes, blue light stays on after it’s fully charged. | Low Battery Warning | Red light flashes twice every 3 seconds |
| Bluetooth | Bluetooth 5.0, supports AAC/SBC/aptX/aptX Low Latency/aptX HD/LDAC/HWA | MFi | Yes |
| Sampling Rate Supported Up to | 384kHz/32bit（USB IN） | DSD Support（USB IN） | DSD64/128/256 |
| 192KHz/24bit（COAX IN） | |||
| 96KHz/24bit（OPT IN） | |||
| Chips Used | DAC: AK4493EQ * 2 , USB: XMOS XU208 , Bluetooth： CSR8675 , LPF：OPA1642×2，Volume IC：NJW1195 OP+AMP：AD8620+OPA926 | ||
| Line output specifications | |||
| THD+N | ＜0.001% (1 kHz/10kΩ) | SNR | ≥115 dB (A-weighted) |
| Frequency Response | 5 Hz~90 kHz（-3dB） | Channel Separation | ＞97 dB (1 kHz) |
| Line level | 1.8 Vrms | ||
| AM3E Headphone out specifications (3.5mm headphone out jack) | |||
| Output Power 1 | ≥280 mW（16Ω / THD+N＜1%) | Output Impedance | ＜1.2Ω (32Ω loaded) |
| Output Power 2 | ≥210 mW（32Ω /THD+N＜1%) | Channel Separation | ≥75 dB (1 kHz，AUX IN) |
| Output Power 3 | ≥30 mW（300Ω / THD+N＜1%) | THD+N | ＜0.002% (1 kHz） |
| Frequency Response | 5 Hz~50 kHz（-3dB） | Peak Output Voltage | ＞6 Vp-p |
| SNR | ≥117 dB (A-weighted) | Max. Output Current | 150mA (For reference) |
| Max. Input Level | 3.8 Vrms | ||
| Balanced headphone out specifications (2.5mm/4.4mm TRRS headphone out jack) | |||
| Output Power 1 | ≥535 mW（16Ω / THD+N＜1%) | Output Impedance | ＜2Ω (32Ω loaded) |
| Output Power 2 | ≥560 mW（32Ω /THD+N＜1%) | Channel Separation | ≥105 dB (1 kHz，AUX IN) |
| Output Power 3 | ≥112 mW（300Ω / THD+N＜1%) | THD+N | ＜0.002% (1 kHz) |
| Frequency Response | 5 Hz~50kHz（-3dB） | Peak Output Voltage | ＞10.5 Vp-p |
| SNR | ≥115 dB (A-weighted） | Max. Output Current | 150 mA (For reference) |
| Max. Input Level | 3.8 Vrms | ||
