Jums ir tukšs Jūsu iepirkumu grozā.
Details
Audio-Technica AT-XP5 Plokštelių grotuvo patefono galvutė dažnių juosta 20 - 18,000 Hz, kanalų atskyrimas 20 dB prie 1kHz | Nemokamas Pristatymas
AT-XP5
Magnetinis Stereo Kartridžas
The AT-XP5 is specially designed for the needs of DJs. This cartridge features a highly-rigid polyphenylene sulfide (PPS)/glass fiber body and a tracking force of 2 to 4 grams. It also offers a powerful output level of 5.5 mV, and its 0.3 x 0.7 mil elliptical bonded stylus tracks the record groove with high accuracy for outstanding audio reproduction. Plus, the cartridge is specifically designed to provide maximum visibility of the stylus tip.
- Durable design for high-quality specialist DJ playback
- Cartridges designed for DJ venue applications for their Hi Fi audio Performance
- VM dual magnet cartridge with 0.3 x 0.7 mil elliptical bonded stylus
- Audiophile experience associated with DJ’ing environment with the signal output level and output impedance characteristics adapted to DJ professional mixing boards
- Carbon ABS cantilever
- Great visibility of stylus tip for DJ use
- High-rigidity and Low-resonance cartridge housing
- Durable design for high-quality DJ playback
- Replacement Stylus: ATN-XP5
Specifikacijos
| Type | VM Dual Magnet |
| Mounting | Half-inch |
| Frequency Response | 20 - 18,000 Hz |
| Channel Separation | 20 dB at 1kHz |
| Output Channel Balance | 2.0 dB |
| Output Voltage | 5.5 mV (mV at 1 kHz, 5 cm/sec) |
| Vertical Tracking Angle | 20° |
| Vertical Tracking Force Range | 2.0 - 4.0g |
| Stylus Shape | Elliptical |
| Stylus Size | 0.3 x 0.7 mil |
| Cantilever | Carbon Fibre Reinforced ABS |
| Coil Inductance | 1.0 H (1 kHz) |
| Static Compliance | 20 x 10-6 cm/dyne |
| Dynamic Compliance | 6.0x10-6cm/dyne (100Hz) |
| Recommended Load Impedance | 47,000 ohms |
| Recommended Load Capacitance | 100-200 pF |
| Weight | 6.2g |
| Dimensions | H17.2×W17.8×D28.3mm |
| Replacement Stylus | ATN-XP5 |
| Accessories Included | Cartridge installation slotted screws 11.0 mm (0.43”) x 2 and 8.0 mm (0.31”) x 2, Washer x 2, Round nut x 2, Non-magnetic screwdriver x 1 |
