Vai jums ir jautājumi? +370 698 34349 
Tirdzniecība

Audio-Technica AT-LP3xBT plokštelių grotuvas / patefonas pilnai automatinis su fonokorektorium ir Bluetooh | nemokamas pristatymas

Pieejamība: No krājuma

Regulārā cena: €359,00

Speciali kaina €269,00

Audio Technica

Details

 Audio-Technica AT-LP3XBT plokštelių grotuvas / patefonas pilnai automatinis su fonokorektorium | nemokamas pristatymas

PILNAI AUTOMATINIS PATEFONAS

  • FULLY AUTOMATIC BELT-DRIVE STEREO TURNTABLE WITH UNIVERSAL TONEARM & HEADSHELL

    • Fully Automatic Belt-Drive system
    • Specially designed AT91R phono cartridge
    • Removable universal AT-HS3 headshell
    • Balanced straight tonearm
    • Switchable MM & MC modes
    • 33⅓ & 45 RPM selectable speeds
    • Išmatavimai 435 mm ×353 mm×128 mm (W×D×H)
      Svoris 5.2kg
  • Produkto savybės

    • ADVANCED FULLY-AUTOMATIC BELT-DRIVE TURNTABLE

      A revolution in automation, the LP3 blends outstanding analogue sound with advanced features unique to a fully-automatic belt-drive turntable. Play 33⅓ & 45 RPM records with a pre-mounted AT91R Dual Moving Magnet phono cartridge whilst the tonearm’s removable universal headshell and switchable cartridge mode allows listeners to experiment with moving magnet and moving coil cartridges. Complete with a built-in phono pre-amplifier, the LP3 represents the next level for vinyl lovers.

      • Fully automatic belt-drive turntable operation with two speeds: 33-1/3, 45 RPM
      • Balanced straight tonearm with hydraulically damped lift control and lockable rest
      • Built-in switchable phono/line pre-amplifier with attached dual RCA output cable
      • Switchable modes for moving magnet and moving coil cartridges
      • AT91R Dual Moving Magnet™ phono cartridge and AT-HS3 universal headshell
      • Anti-resonance, die-cast aluminium platter with 4.5 mm thick rubber mat
      • Damped base construction for reduced low-frequency feedback colouration
       

      MM / MC CARTRIDGE SELECTOR SWITCH

      Switchable MM/MC mode allows the listener to use both Moving Magnet and Moving Coil cartridges on their LP3, allowing for greater sonic customisation – a unique feature not found on most turntables with a built-in phono preamplifier.

      AT91R DUAL MOVING MAGNET CARTRIDGE

      Specially designed for the LP3, the AT91R Dual Moving Magnet™ phono cartridge incorporates an aluminium cantilever for higher-rigidity and improved pick-up of subtle details.

      UNIVERSAL HEADSHELL

      Removable universal AT-HS3 headshell allows users to upgrade their cartridge to further enhance their sound. Suitable for 1/2" mount cartridges and 4-pin turntable arms.

      BALANCED TONEARM

      Incorporating a hydraulically damped lift control and lockable rest, the LP3’s straight balanced tonearm includes a radial ball bearing for horizontal movement and pivot bearings vertical movement.

      4.5MM PLATTER MAT

      Reducing unwanted vibration and for stable play, the LP3 includes a 4.5mm thick rubber platter mat.

      Turntable
      Type Fully Automatic, Belt-Drive
      Motor DC motor
      Speeds 33-1/3 RPM, 45 RPM
      Turntable Platter Die-cast aluminium
      Wow and Flutter Less than 0.2% WRMS (33 1/3 RPM) at3kHz
      Signal-to-Noise Ratio > 60 dB
      Output Level “PHONO” (MM) 3.5mV nominal at 1kHz, 5cm/sec 
      “LINE” (MC) 220mV nominal at 1kHz, 5cm/sec
      Phono Pre-Amp Gain 36dB nominal, RIAA equalised
      56dB nominal, RIAA equalised
      Power Supply Requirements 220 to 240 V / 50, 60 Hz
      Power Consumption 2W
      Dimensions 435 mm ×353 mm×128 mm (W×D×H)
      Weight 5.2kg
      Accessories Included Rubber mat, Dust cover, Platter (with drive belt), Counterweight, AT-HS3 Headshell with AT91R VM stereo cartridge, 45 RPM adapter, Power cable
      Cartridge & Stylus
      Model AT91R
      Type VM Dual Magnet
      Output Voltage 3.5mV (mV at 1kHz, 5 cm/sec)
      Vertical Tracking Force Range 1.5 to 2.5g (standard 2.0g)
      Stylus Construction 0.6 mil bonded conical
      Cantilever Aluminium pipe
      Recommended Load Impedance 47,000 ohms
      Weight 5.0g
      Headshell
      Model AT-HS3
      Weight 11.1g
      Overhang Adjustment 8mm
      Tone arm
      Type Static balanced straight shaped with soft damping control
      Effective Length 221.5mm
      Overhang 19mm
      Maximum Tracking Error Angle Less than 3°
      Stylus Pressure Adjustment Range 1 to 4g
      Applicable Cartridge Weight 14.5 to 20g
      Anti-skating Range 0 - 3 g

      AT-LP3XBT

      The AT-LP3XBT is a fully automatic turntable designed to deliver outstanding analogue sound with enhanced Bluetooth® wireless technology.

      Bringing the clarity and warmth of analogue audio to the digital generation, this Bluetooth® turntable offers all the benefits of vinyl with the convenience of enhanced connectivity. Enjoy the freedom to connect to the latest speakers or headphones with Bluetooth® wireless technology at just the touch of a button - your analogue listening journey starts here.

      Analogue or Bluetooth® Connectivity

      High-Fidelity Audio

      The LP3XBT connects seamlessly to a wide array of Bluetooth® compatible devices, including speakers and headphones. Its compatibility with the high-quality Qualcomm® aptX™ audio codec ensures exceptional sound reproduction when using the LP3XBT.

      For vinyl enthusiasts looking to replicate the distinct, warm sounds of analogue audio, the AT-LP3XBT can also be used as a wired turntable.

      Bluetooth® Wireless or Wired Listening
      AT-VM95C Dual Magnet Phono Cartridge
      Built-in Switchable Phone Pre-Amplifier
      Plays 33⅓ and 45 RPM Records

      Easy Operation

      Simple to Setup

      Automatic operation is a superb choice for those looking for an easy-to-use turntable setup. Play, stop, and change rotation speeds with ease. With a hydraulically damped lift control and lockable rest, all you need to do is lower the balanced straight tonearm into position and allow your turntable to work its magic.

      The LP3XBT plays two speeds: 33⅓, and 45 RPM.

      Refine Your Sound

      The tonearm’s removable AT-HS3 universal headshell and dual moving magnet cartridge allows you to experiment with your cartridge choice to find the perfect sound to suit your listening preferences. The AT-VM95C cartridge is compatible with any VM95 Series replacement stylus, offering a wide choice of options for every budget and application.

      Style and Substance

      The damped base construction provides reduced low-frequency feedback coloration, while the die-cast aluminium platter with a felt mat controls resonance to reduce unwanted vibration.

      AT-LP3XBT is available in two classic colours – black or white.

      AT-LP3XBT Automatic Turntable (wireless & analogue)

      Comparing AT-LP3 and the AT-LP3XBT

      What’s the Difference?

      The LP3XBT is based on the AT-LP3, but incorporates a host of exciting new features and capabilities including:

      • Bluetooth® connection
      • High-quality Qualcomm® aptX™ audio codec
      • The AT-VM95C cartridge, which is compatible with any of Audio-Technica‘s VM95 Series replacement styli
      • An external AC adapter, which handles the AC/DC conversion outside of the chassis, reducing noise in the signal chain to produce crystal clear audio

      60 Years of Analogue Audio

      Audio-Technica has developed cartridge and turntable technology for over 60 years. We are passionate about the art of analogue listening, and we are proud to produce some of the most critically acclaimed and popular audio products in the world.

New layer.....

Rakstīt atsauksmi

Tu esi pārskatot: Audio-Technica AT-LP3xBT plokštelių grotuvas / patefonas pilnai automatinis su fonokorektorium ir Bluetooh | nemokamas pristatymas